CCTV Installation and Wiring Options
Today there are a lot of options when it comes to choosing a quality CCTV security system. You may decide to go with a traditional analog system, HD-SDI, HD-CVI or even an IP network based security products.
One thing all of these options have in common is you will probably have to run some sort wire to the cameras. Yes, there are some “Wireless Security Camera” solutions available on the market today, but if you do some research you will find that there are a lot of limitations to wireless security cameras. Most CCTV professionals would probably not recommend a wireless system in an environment where up-time and security are critical.
Analog, HD-SDI and HD-CVI cameras will need two wires run to them. One for video transmission and a set of power wires in order to power the camera. You could run a coax wire and separate power wires but most CCTV professionals choose to use “Siamese Cable”. Siamese Cable is a manufactured coax cable with a set of power wires attached to it. The power wires can be split off from the coax in cases where your power source may not be in a close proximity to your recording device.